Enjoy 10% off your ÔME HOUSEKEEPING services, reserved for CLUB ÔME members
Black sinks: how to maintain them without damaging them
ÔME HOUSEKEEPING
August 15, 2026 at 8:18:31 PM
Resin and composite sinks are elegant, but they require specific maintenance. Their matte or satin surface reveals very visible limescale deposits against the black background. Abrasive products or strong acids attack them. The key: gentle products, applied thinly, with a protective step after each cleaning.
Why do black sinks need specific maintenance
Limescale leaves very visible white marks on black sinks. Commercial products often contain abrasives or strong acids that gradually dull the surface.
Two natural products are enough:
- Diluted 7% white vinegar: gentle descaler.
- Vegetable oil (sunflower, olive, linseed): protection against limescale.
Absolutely avoid on these surfaces:
- Abrasive products (clay stone, powdered baking soda applied directly).
- Pure citric acid (too aggressive).
- Bleach (attacks the material and dulls it).
- Scouring sponges.
Maintenance protocol:
1. Descaling: Prepare a solution of 7% white vinegar diluted 50/50 with water. Apply with a soft cloth, let sit for 5 to 10 minutes on limescale areas, gently scrub with a microfiber cloth, rinse and dry immediately.
2. Protection: Once dry, apply a few drops of vegetable oil with a clean cloth in circular motions, then wipe off the excess. The oil forms an invisible water-repellent film that prevents limescale from sticking.
Important tip: ALWAYS dry the sink after use, as stagnant hard water is the primary cause of white marks. Never let pure vinegar sit, as an overly concentrated acid can damage the resin over time.
Vegetable oil doesn't clean, it protects. An invisible film that prevents limescale from sticking. Two minutes after cleaning, it's done.
The two-step protocol
STEP 1 - DESCALING
Prepare a solution of 7% white vinegar diluted 50/50 with water. A few drops of black soap can be added to boost the degreasing effect.
Apply with a soft cloth over the entire surface.
Let sit for 5 to 10 minutes on heavily limescaled areas.
Gently scrub with a microfiber cloth. No scouring sponge.
Rinse with clear water and dry immediately (do not let the water dry on its own, as it leaves limescale).
Maintenance frequency
Routine cleaning (daily or after use): rinse with clear water, dry with a clean cloth.
Vinegar descaling: at least once a week in areas where the water is very hard.
Protective oil application: after each descaling, or at least once a week.
The most important step: ALWAYS dry the sink after use. Hard water that dries slowly is the primary cause of white marks.
Conclusion
Black sinks are beautiful but demanding. With two natural products - vinegar and vegetable oil - and the good habit of drying after use, they keep their shine without any harsh chemical products.
Tip
Never let vinegar sit for a long time on a black sink. Always dilute it 50/50. An overly concentrated acid can damage the resin over time.
